Spill Barrier EVA (Natural Sponge) Bund 2.5cmH x 28cmW x 1mtrL
Features
Code:SCBB07305
Height: 2.5cm
Width: 28cm
Length: 96cm
Weight: 200g
THE SPILL BARRIER BUND has been designed to prevent a spill from migrating into the yard from your shed. SBB will accommodate the use of a forklift and any road vehicle with out damage to the unit. The SCS Spill Barrier Bund has a beveled edge on either side and a flat top surface which allows a forklift/vehicle to move unrestricted up and over the unit, without damage to the forklift/vehicle or the Spill Barrier Bund and can be only be purchased in yellow.
NOTE:
1. The Spill Barrier Bund is delivered to you already glued on the underneath and edges, If you intend to mitre or cut your spill barrier bund into another shape, you will need use a glue. You can purchased the glue from us or buy it yourself. This is listed under the following code.
Code: SCSBB07315
1 off 250ml Tub of Glue
1 off Applicator Brush
