Spill Barrier (CR160 Neoprene) Bund 4cmH x 14cmW x 1mtrL
High Rise Neoprene Bund
Code:SCBB07320
Height: 4cm
Width: 14cm
Length: 96cm
Colour: Black with green reflective strip
Properities
Closed Cell Neoprene foam, airtight and waterproof.
Self extinguishing.
Excellent resistance to aging, oil, solvent and many chemicals.
Highly consistent cell structure and thickness with no voids or inclusions. Ideally suited to stringent automotive tolerances.
Typical Properties
Specific Gravity 160 kg/m³ +/- 30kg/m³
Tensile Strength 4.0kg/cm²min
Hardness 25 +/-5 HS (c-type)
Elongation 150 % min
Compression Strength @25%, 30kg/100 cm² +/-10
Water Absorption 0.005 g/cm² max
Compression Set 25% max
(50%, x 20c x 22hrs)
Heat Shrinkage 4% max
(70c x 4hrs)
Combustion Test UL Standard Pass UL-94 HF-1
Colour Black
Maximum Service Temperature (100ºC) -30ºC to + 100ºC
Test Method: KS M 3014 & KS M 6550
THE SPILL BARRIER NEOPRENE BUND is our latest addition to the Spill Barrier range of bunding and has been designed to prevent a spill from migrating into the yard from your shed. Our new SBB has a green reflective strip and will accommodate the use of a forklift and any road vehicle with out damage to the unit. The SCS Spill Barrier Bund has a beveled edge on either side and a flat top surface which allows a forklift/vehicle to move unrestricted up and over the unit, without damage to the forklift/vehicle or the Spill Barrier Bund and can be only be purchased in black with a green reflective strip.
NOTE:
1. The Spill Barrier Bund is delivered to you already glued on the underneath and edges, If you intend to mitre or cut your spill barrier bund into another shape, you will need use a glue. You can purchased the glue from us or buy it yourself. This is listed under the following code.
Code: SCSBB07315
1 off 250ml Tub of Glue
1 off Applicator Brush
